TATA STEEL Conveyance and Pressure Tubes
The complete solution – a dedicated family of tube products, delivering a simplified approach to satisfy the widest range of application demands.
Our family of multi-certified HFI (High Frequency Induction) welded tubes, deliver a rationalised, simplified and convenient range of dedicated products to satisfy the widest range of building, engineering and industrial applications.
Our hot-finished offering provides uniform stress-free tubes, with consistent mechanical properties, improved ductility delivering true application benefits, and can be considered as an alternative to comparable hot-finished seamless products.
All our products are fully technically supported by a full set of technical literature, including design and pressure data, in addition we have technical experts available to provide product training and offer advice on applications and product suitability.
For further information about these or other products, please contact our technical sales team who will be happy to help.
http://www.tatasteeleurope.com/en/products-and-services/long/tubes/conveyance
TATA STEEL MANUFACTURERS OF :: Conveyance and Pressure Tubes
INSTALL and INSTALL PLUS
For all your building, engineering and industrial services solutions
We offer a range of ‘gaslist’ tube suitable for a wide range of applications including:
Heating, Ventilation and Air Conditioning (HVAC).
Compressed air.
Steam services (note: this will be a function of the jointing system employed).
Low pressure gas systems in buildings.
General purpose services – water conveyance.
Process and industrial plant.
Fire sprinkler, protection and suppression systems.
Cable conveyance and ducting tube.
INSTALL PLUS
Install Plus multi-certified, hot-finished tube can be used with confidence and is the professional’s choice for a wide variety of building, engineering and industrial service applications.
Our principal ‘gaslist’ tube for UK market applications.
Manufactured in accordance with a range of standards, including EN10255 and EN10217-2 to satisfy both Construction Products Regulation (CPR) and the Pressure Equipment Directive (PED) requirements, where applicable.
The perfect replacement for BS1387, which is now a withdrawn and unsupported standard.
Install Plus uses a higher 235MPa grade of steel (compared to lower 195 grade as per BS1387) delivering improved pressure integrity.
CE marked to CPR CAT 3 (gas/fuel) and CPR CAT 4 (water) for added confidence and application suitability.
Suitable for pressure applications and temperature range -20 to +300ºC.
Available in a wide range of sizes and weights.
We are able to offer exact lengths for bulk orders.
Available in a range of ends (plain, grooved or screwed and socketed) and surface finishes (red-painted or galvanised).
Other special surface colours and finishes, including external epoxy and polymer coatings may also be available, please contact us to discuss your requirements.
Our pre-grooved tube offers project savings as well as other installation benefits.
Install Plus is fully technically supported with a wide range of available product datasheets.
INSTALL
Install tube is a robust and reliable building and engineering services solution.
Our principal ‘gaslist’ tube for MLE market applications.
Single certified product, manufactured in accordance to EN10255.
CE marked to CPD CAT 3 (gas/fuel) and CPD CAT 4 (water) for added confidence and application suitability.
195 steel grade.
Suitable for pressure applications and temperature range -20 to +300ºC.
Available in a wide range of sizes and weights.
Available in a range of end (plain, grooved or screwed and socketed) and surface finishes (painted, polymer, epoxy or galvanised).
Install is fully technically supported with a range of available product brochures.
TATA INLINE and INLINE PLUS
Specialist building and industrial services – industrial, process and linepipe solutions.
Inline Plus and Inline, an exclusive range of UK manufactured, multi-certified hot-finished, pressure tube products to meet the specific needs and expectations of industrial end-users. Suitable for use in a wide range of applications, including:
Low pressure gas distribution and installation systems.
High pressure gas (Inline Plus only, for pressures >16<100bar).
Specialist industrial HVAC and water conveyance.
Steam services.
Petrochemical.
Process plant.
LPG & fuel oils (self-colour only).
On shore gas/line pipe.
Seamless replacement (for comparable strengths)
INLINE PLUS
Our high strength, multi-certified, hot finished HFI welded pressure tube with additional testing requirements, for specialist building and engineering services - industrial, process and linepipe solutions.
Primary standard EN 10208-2 Grade L360NB/MB.
EN10217-3 P355NH/TC1.
ISO3183 L360N/M.
API 5L Grade X52N/M PSL2.
Generally equivalent to seamless EN10216-2.
P355NH/TC1, EN 10208-2 L360NB, ISO 3183 L360N & API 5L X52N
Fully aligned with PED-97/23/EC & AD 2000 W4.
Suitable for pressure applications and temperature range -20 to +400ºC.
Available in a wide range of sizes and wall thicknesses.
Available in a range of end (bevelled, plain) and surface finishes (self-colour, painted, polymer, epoxy or galvanised) (Note: certain size restrictions may apply).
For full product details, please refer to the supporting technical brochure.
INLINE
Our multi-certified, hot-finished HFI welded pressure tube for specialist building and engineering services - industrial, process and linepipe solutions.
Primary standard EN10217-2 Grade P265GH/TC1.
API 5L Grade B PSL1.
API 5L Grade X42 PSL1 (≥OD219.1mm).
EN ISO3183 L245.
EN10208-1 L245GA.
Generally equivalent to seamless ASTM A106 Grade B & C, ASTM A53 Grade B, EN10216-2, P265GH, EN10208-1 L245GA, EN ISO 3183 L245 & API 5L Grade B (also X42 for ≥OD219.1mm).
Fully aligned with PED-97/23/EC & AD 2000 W4.
Suitable for pressure applications and temperature range -20 to +400ºC.
Available in a wide range of sizes and wall thicknesses.
Available in a range of end (bevelled, plain) and surface finishes (self-colour, painted, polymer, epoxy or galvanised) (Note: certain size restrictions may apply).
For full product details, please refer to the supporting technical brochure.
TATA INFLOW and INFLOW PLUS
General purpose pressure conveyance solutions.
An exclusive range of UK manufactured, multi-certified pressure tube products to meet the specific needs and expectations of end-users.
Inflow Plus multi-certified, hot-finished tubes are suitable for a wide range of applications, including:
HVAC and general purpose conveyance
Steam services
Petrochemical
Process plant
Industrial conveyance
Boiler applications (to be specified at time of order)
LPG & fuel oils (self-colour only)
Fire protection
General engineering
Wear resistance applications
INFLOW PLUS 355
Our high strength, multi-certified, hot-finished HFI welded pressure tube for general purpose and industrial conveyance solutions.
Primary standard EN10217-3.
Grade P355NH TC1.
Aligned with DIN1626 and DIN17179 where applicable.
Fine grain steel for high strength requirements.
Specific compositional delivery conditions.
Improved wear resistance compared to Inflow Plus 235.
Enhanced ductility.
Fully aligned with PED-97/23/EC and AD 2000 W4.
Suitable for pressure applications and temperature range -20 to +400ºC.
Available in a wide range of sizes and wall thicknesses.
Available in a range of end# (bevelled, plain) and surface finishes# (self-colour, painted, polymer, epoxy or galvanised) (# note: certain size restrictions may apply).
V=1.0, ultrasonic tested weldline
For full product details, please refer to the supporting technical brochure
INFLOW PLUS 235
Our multi-certified, hot-finished HFI welded pressure tube for general purpose and industrial conveyance solutions.
Primary standard EN10217-2
Grade P235GH TC1
Generally equivalent to seamless ASTM A106 Grade B & EN10216-2
Aligned with BS3059-2, BS3602, DIN1626, ASTM A53 where applicable
Fully aligned with PED-97/23/EC and AD 2000 W4
Application range -20 to +400 degC
Suitable for pressure applications and temperature range -20 to +400ºC.
Available in a wide range of sizes and wall thicknesses.
Available in a range of end# (bevelled, plain) and surface finishes# (self-colour, painted, polymer, epoxy or galvanised) (# note: certain size restrictions may apply).
V=1.0, ultrasonic tested weldline
Boiler option available, and also covers DIN1628 & 17177 (DIN1630 & DIN17175) – please specific at time of order.
For full product details, please refer to the supporting technical brochure
INFLOW (CDC – Cold Dual Cert)
Our cold formed dual-certified HFI welded pressure tube for general pressure and engineering applications conveyance solutions.
Primary standard EN10217-1 Grade P235TR1
EN10219 Grade S235JRH
Best Quality Steel Pipes !! Genuine Suppliers of Tata Pipes Tata Steel Tata Tubes, Look Up Quick Results Now!, Better Deal On Bulk Tata Pipes Tata Steel Tata Tubes., Supplier of Tata Pipes Tata Steel Tata Tubes India, Call us Now & Get Free Estimates!
Tata Pipes Tata Steel Tata Tubes UAE. Tata Pipes Tata Steel Tata Tubes Qatar, Tata Pipes Tata Steel Tata Tubes Kuwait, Tata Pipes Tata Steel Tata Tubes IRAN, Tata Pipes Tata Steel Tata Tubes Saudi Arab , Tata Pipes Tata Steel Tata Tubes Indonesia, Tata Pipes Tata Steel Tata Tubes Russia
Engineers Also Search Tata Brands Pipes & Tubes
To find out more about our Conveyance / Pressure Tube, and get more information please fill enquiry form and one of our sales representatives will contact you.
Industry We Serve Inconel Pipe Tube, Monel Pipe Tube, Hastelloy Pipe Tube, Nickel Pipe Tube, Alloy Steel Pipe Tube and Stainless Steel Seamless Pipes Tube Tubing Tuberia Supplied Architectural & General Engineering, Automobiles Industry, Breweries & Distilleries Industry, Cement Industry, Chemicals Industry, Dairy & Food Processing Industry, Fertilizers Industry, Heat Exchangers Industry, Oil Companies, Petrochemicals & Refineries, Power & Nuclear Energy / Atomic Energy, Railway Industry, Ship Building Industry, Solvent & Pulp Industry, Submersible Pumps Industry, Sugar Industry, Textile Machinery & Processing Houses etc..
Find Our Dealers are in below countries:
|| Brand Products Matching Your Requirements ||
Engineers Also Search Below Brands Pipes & Tubes
WE ARE SPECIALIST
ORIGIN MATERIAL We Have
- Tata Steel
- Essar Steel
- Arcelor Mittal
- Sosta Stainless Pipes
- ARVIND PIPES TUBES
- ISMT Ltd
- Tata Tubes
- Tata Structura
- inox tech pipes
- Kobe steel Pipes
- Maharashtra Seamless Ltd (MSL)
- Jindal Star Pipe
- Jindal Saw Ltd.
- Jindal Steel Jpl Pipe
- Nippon Steel (Sumitomo Metals)
- Ratnamani Metals Tubes Ltd
- Remi Group Remi Steel Pipes
- Sandvik Materials Technology
- Sanyo Special Steel Pipes
- Suraj Limited
- Tenaris pipes
- Tubacex Pipes
- DMV Stainless Pipe
- Seah Steel - South Korea
- Mukat Pipes Limited
- Lalit Pipes and Pipes Limited
- Man Industries India Limited
- EEW – SOUTH KOREA
- Eisenbau Kraemer GERMANY
- Lloyds Line Pipes Limited (LLPL)
- zenith steel pipes zenith birla Limited
- ESW PIPE – GERMANY
Materials
- Inconel ®
- Monel ®
- Hastelloy ®
- Nickel ®
- Alloy Steel
- API 5L Line Pipe
- Carbon Steel
- Duplex / Super Duplex Steel
- Stainless Steel
- Duplex / Super Duplex
- Carbon Steel
|
Clients' TestimonialsWhy us?
|
